DTG Kiosk Specifications download pdf (Page 25)

Emergency Stop Button

The Emergency Stop button

should only be used in an Emergency, for

reat of injury to person or

of the DTG HM1 Kiosk.

ent

printer operations will cease.

Head Operation Controls

The Head Operation Controls provide control over the Print Head operations and are also used

as indicators as to the Printer Status:

The POWER button turns the Moving Head Unit on and off. This LED in

this button flashes (green) while the printer begins various movements,

such as self cleaning etc. It will also flash if the Ink button has been

pressed (and the Print Head Carriage is in the cartridge exchange

ta processing or printing. When the printer is

The INK button was originally used to change the ink cartridges in a

The ERROR EJECT button turns on when the print data is sent from the

ting

process is cancelled from the computer. Turn the printer off and leave

off for a few minutes to clear the data in the printer buffer.

example where there is immediate th

persons by the movement / operation

Engage the Emergency Stop by pushing the red knob forcibly. This wi

interrupt A/C power supply to the DTG HM1 Kiosk and all curr

Release the Emergency Stop button by turning the red knob in a

clockwise direction.

position) and during da

ready to print, the LED will stop flashing and become solid green. The

Power LED will flash rapidly during the Power Off sequence

standard Epson R2400. On the DTG HM1 Kiosk™ it is used as a HEA

CLEANING button. Press this button for 3 seconds to clean the Print

Head.

computer even though the printer is not in a Ready state (Press LOA

button to move the Moving Head Unit to the loaded position).

This button flashes and the Moving Head Unit stops when the prin

1 2 ... 20 21 22 23 24 25 26 27 28 29 30 ... 58 59

No comments

DTG Kiosk Specifications Page 25